Horse cut out

Use a foam base & tooth pick to make the figure stand up

The horse will be 1.5" thick foam & available in 3 sizes
You can order them unfinished for you to decorate or you can order them in glitter colors.
The items will be glittered on all sides.
Available in 3 sizes.
9" wide x 7" tall
11" wide x 8" tall
14" wide x 11" tall

Use only water based non-petroleum products.

 Lipstick cut out available in 4 sizes.

Either unfinished white or glittered with top red, middle gold & bottom black.
If you prefer other colors for the top, middle & bottom. Just order them finished & add a note of your colors.

Nail Polish Bottle available in 4 sizes.

The color choice is for the bottom/polish color.

For glittered the top of the bottle will be black. If you want it a different color. Send a message with your order of what color you need.

The bottle will be 1.5" thick foam & available in 4 sizes 6" tall - 9" tall - 11" tall - 15" tall

You can order them unfinished for you to decorate or you can order them in glitter colors.
For glittered the top of the bottle will be black. If you want it a different color. Send a message with your order of what color you need.
The color choice is for the bottom/polish color

Select 1 color for your Custom Finish on both sides.

Includes an acrylic rod to insert into a centerpiece.
THE PRICE is for 1 Piece only

These microphone colors are set to the music theme

Email Scott@CutOutz.com or call us with questions.
If you need the items larger, other color options or custom shapes

12" tall x 1.5" thick EPS Foam Flash Dancer cut out

You can order them unfinished for you to decorate or you can order them in glitter colors.
The items will be glittered on all sides.

Use a EPS foam base & tooth piece to make the figure stand up

Use only water based non-petroleum products. Spray paint can eat the foam.

Contact us if you need the items finished with a color, larger, or custom shapes.

Use Styrofoam cut outs for a dancer themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

White Unfinished EPS Foam.12"tall x 1.5" thick.
10 piece set includes: Base, Spoke, Wheel, (5) Seats, (2) Stars
Decorate with paint and glitter. Use only water based non-petroleum products.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mounting your foam cut out on a board or background.

White Unfinished EPS Foam
10" x 1.5" thick

Decorate with paint and glitter. Use only water based non-petroleum products.

Email info@awesomeevent.com or call us with any questions or if you need a custom size or design.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to punture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a STYROFOAM^tm base. You will first need to punture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

8" x 1.5" thick EPS Foam Glittered Pink Ribbon.
Use in centerpieces for Breast Cancer Awareness events.

White Unfinished EPS Foam
12" tall x 1 1/2" Thick EPS foam

Decorate with paint and glitter. Use only water based non-petroleum products.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

White Unfinished EPS Foam
8" x 1.5" thick EPS Foam Cross.

Decorate with paint and glitter. Use only water based non-petroleum products.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mounting your foam cut out on a board or background.

White Unfinished EPS Foam.8" tall x 1.5" thick.
Decorate with paint and glitter. Use only water based non-petroleum products.

Can be painted and glittered the color for your event.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

White Unfinished EPS Foam
Available in 3 sizes.

Decorate with paint and glitter. Use only water based non-petroleum products.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mounting your foam cut out on a board or background.

White Unfinished EPS Foam.6" tall x 1.5" thick.
Decorate with paint and glitter. Use only water based non-petroleum products.
Emailinfo@awesomeevent.comor call us with any questions or if you need a custom size or design.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

White Unfinished EPS Foam.6" x 1.5" thick.
Decorate with paint and glitter. Use only water based non-petroleum products.
Email info@awesomeevent.com or call us with any questions or if you need a custom size or design.
Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to punture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a STYROFOAM^tm base. You will first need to punture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

White Unfinished EPS Foam
Available in 3 sizes.

Decorate with paint and glitter. Use only water based non-petroleum products.

Emailinfo@awesomeevent.comor call us with any questions or if you need a custom size or design.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

The lips will be 1.5" thick foam & available in 3 sizes.
6" wide x 4" tall
9" wide x 6" tall
12" wide x 8" tall

Price is for 1 piece.
You can order unfinished & you can decorate the items with paint & glitter & add embellishments to add to your designs.
Or we can glitter the heart on all sides.

Use only water based non-petroleum products. Spray paint can eat the foam.

Contact us if you need the items finished with a color, larger, or custom shapes.

Use Styrofoam cut outs for a Valentine Day, love, peace hearts, holiday themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.