Hockey Goalie - Cut out of 1.5" EPS foam.

Create your own custom decorations with our Unfinished Ballerina Foam Cutout. Each shape measures 11 inches tall, with the width proportional to the design, and is cut from 1.5" thick EPS foam.

Perfect for table centerpieces for recitals and all special occasions

Foam cutouts are lightweight and self-supporting. For extra stability, we recommend inserting them into a foam base.

Add a base for $6.00. Add Glittered Base $6.00 – Party Shapes, LLC

Decorating Tips

• Use water-based paints such as acrylic or tempera.
• For glitter application, mix paint and school glue in a 50/50 ratio, apply to the surface, and cover with glitter while wet.

Important Information

• Use water-based, non-petroleum paints and adhesives only.
• Spray paint may melt or damage EPS foam and should not be used.
• Always test new products on a small area first.
• Hot wire cut lines may be visible and can be filled with paintable latex caulk before decorating.

Attaching to a Foam Base
Insert a toothpick or bamboo skewer into the shape, remove it, add glue to the hole, and reinsert the skewer. Use same procedure for inserting it into the base.

✔ Lightweight yet sturdy
✔ Easy to paint and decorate
✔ Perfect for DIY centerpieces and party decor

________________________________________

Eifel Tower 11" Tall cut out of 1.5" thick EPS foam.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Measures 18" tall x 1.5" thick EPS Foam.
EPS Foam can be decorated with water based paints, adhesives and glitter.

Jukebox cut out of unfinished EPS Foam.12"tall x 1.5" thick.

Only use water based non-petroleum paint to finish

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if just painting. The glitter hides the masking tape better.

Double Music Note cut out of 1.5" thick EPS foam.

Available in 3 sizes and your choice of glitter colors.

Use a toothpick or bamboo skewer to attach to a foam base.

Cross cut out of EPS foam.

Order unfinished or glittered in your choice of size and color.

 EPS Foam.12"tall x 1.5" thick.

Male Diver Cut out of EPS foam  1 1/2" thick

Order unfinished or glittered

12" Tall Rugby Player

EPS Foam
Available in 2 sizes.
8" tall x 12" wide x 1.5" thick
12" tall x 17" wide x1.5" thick

 Body Builder Cut out of EPS Foam.11"tall x 1.5" thick.

Order unfinished or glittered in your choice of color.

Jogger cut out of 11" tall x 1.5" thick.

Use a toothpick or bamboo skewer to attach to a foam base - ordered separetly

11"tall x 1.5" thick.

11"tall x 1.5" thick.
Order unfinished or glittered

10" tall x 1.5" thick. EPS Foam

Mask cut out of 1.5" thick foam.

Available in 3 sizes

11"tall x 1.5" thick.

Create your own custom decorations with our Unfinished Sports Foam Cutout. Each shape measures 11 inches tall, with the width proportional to the design, and is cut from 1.5" thick EPS foam.

Perfect for table centerpieces for sports banquets and all special occasions

Foam cutouts are lightweight and self-supporting. For extra stability, we recommend inserting them into a foam base.

Decorating Tips

• Use water-based paints such as acrylic or tempera.
• For glitter application, mix paint and school glue in a 50/50 ratio, apply to the surface, and cover with glitter while wet.

Important Information

• Use water-based, non-petroleum paints and adhesives only.
• Spray paint may melt or damage EPS foam and should not be used.
• Always test new products on a small area first.
• Hot wire cut lines may be visible and can be filled with paintable latex caulk before decorating.

Attaching to a Foam Base
Insert a toothpick or bamboo skewer into the shape, remove it, add glue to the hole, and reinsert the skewer. Use same procedure for inserting it into the base.

✔ Lightweight yet sturdy
✔ Easy to paint and decorate
✔ Perfect for DIY centerpieces and party decor

________________________________________

White Unfinished EPS Foam.12"tall x 1.5" thick.

11"tall x 1.5" thick.

Soccer Kicker cut out of 11"tall x 1.5" thick EPS foam.

Use EPS foam cut outs for sports party, sports teams themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Hockey Pitcher
11" tall x 1.5" thick EPS Foam Sports Figures.

Choose your glitter color or order it unfinished Unfinished white to finish it yourself

Karate Figure cut out of EPS foam 11"tall x 1.5" thick.

11"tall x 1.5" thick.

Male Golfer Cut out of EPS foam . 11"tall x 1.5" thick.

11"tall x 1.5" thick.

Lacrosse female figure cut out of 12"tall x 1.5" thick.
Decorate with paint and glitter. Use only water based non-petroleum products.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Basketball Shooter cutout standee 15" tall x 1.5"

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a basketball, sports party, sports teams themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Lacrosse Figure cut out of EPS Foam 11"tall x 1.5" thick.
Order unfinished or glittered

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Moon cut out of 1 1/2" thick EPS foam. Available in 6" and 11 1/2" tall.