👠 High Heel Stiletto Foam Cutout – Unfinished or Glittered

Add a glamorous touch to your Sweet 16, shopping or diva-themed party decorations with this stiletto heel foam cutout. Perfect for table centerpieces, or event décor.

---

✨ Glittered Cutouts

• Fully coated in glitter on all sides
• Can be attached to a foam base with a toothpick or bamboo skewer
• Available in custom sizes per listing

Note: Each piece is sprayed with a sealer before shipping, but glitter will still flake off.

 

🎨 Unfinished Cutouts

• Perfect for DIY decorating, painting, or glittering
• Can be attached to a foam base with a toothpick or bamboo skewer
• Available in custom sizes per listing
• Use only water-based, non-petroleum paints, glues, or coatings
• Bulk discounts available

Note: Use water-based paints (tempera or acrylic) and glue for decorating unfinished foam. Mix paint and school glue, apply, and cover with glitter while wet. Do not use petroleum-based paints or spray paints—they can damage EPS foam. Test new products on a small area first.

Set up for joined script names

 Lipstick cut out available in 4 sizes.

Either unfinished white or glittered with top red, middle gold & bottom black.
If you prefer other colors for the top, middle & bottom. Just order them finished & add a note of your colors.

2 Digit numbers are cut out of 1 1/2" thick EPS foam. Available in 6 different heights.

2-Digit Numbers come glittered on all sides in your color selection or order unfinished.

To attach Letters to a foam board, insert and glue toothpick to bottom of letter - then insert into base.   A bamboo skewer can be used for numbers being inserted into a centerpiece.

 Suggestions for painting and applying glitter to unfinished products Select a water based paint—tempera or acrylic.  Mix paint and Elmer’s glue 50/50.  Apply paint glue mixture.  While still wet—pour glitter all over.  Let dry.  

Warning:  Do not use petroleum based paints or adhesives on EPS Foam Products.  Use only water based non-petroleum products.  Spray paint can eat the foam. It is recommended that you rest the product you plan to use on the frame or a scrap piece of EPS foam.

Block Font Letters All Capitals Glittered On All Sides

For sizing purposes, estimate letters that are 6" tall as 6" wide.

For a 36" long Candle Lighting Name Board we recommend 5" or 6" tall letters for names having 6-7 letters,

We are not responsible if letters ordered are too large for the space they are being used.

Email dpfgood@gmail.com or call us with questions.

Spray measures 21" long. 

Use for centerpieces and floral arrangements.

Sold by the dozen.

Designer tip: Curl lightly with dull scissors or fingernail

The Purse Cut Out is a versatile foam purse decoration designed to elevate your party and event decor with eye-catching style. Perfect for shopping-themed parties, diva theme decoration, and boutique displays, this purse cut out adds a fashionable touch that delights guests and creates memorable centerpieces. Crafted from durable 1.5" thick EPS foam, it offers a lightweight yet sturdy structure.

Available in three foam cutout sizes—Small (6 inches wide), Medium (8 inches wide), and Large (12 inches wide)—this colorful party prop fits perfectly on tables or as part of larger design setups. Each glittered foam purse is finished on all sides in your choice of color, providing a sparkling look that enhances party supplies decor and complements high heel party props or other foam party accessories.

Key features include:

• Foam purse decoration crafted from 1.5" thick EPS foam for durability and easy handling

• Multiple foam cutout sizes to suit different display needs (6", 8", and 12" wide)

• Glittered finish options available in your preferred colors for vibrant, eye-catching effects

• Lightweight design enables effortless placement as party foam cutouts or shopping party decor

• Compatible with optional base attachment sold separately to ensure stability during events

This purse cut out is ideal for a variety of occasions such as diva parties, high heel and fashion-themed events, birthday centerpieces, girls' night decorations, baby showers, and other special celebrations. It also works well as boutique displays or colorful party props that enhance your overall event theme.

Using EPS foam shapes ensures each piece is resilient yet easy to transport and set up. The glittered foam purse finish adds a glamorous sparkle that catches light beautifully, making your party supplies decor stand out. Customers praise the quality and the vibrant colors that maintain their shine throughout the event.

Add a base for only $6.00 to attach your purse cut out securely—perfect for freestanding displays or tabletop centerpieces. This accessory provides stability without compromising style. Add Glittered Base $6.00 – Party Shapes, LLC

Enhance your next celebration with this stylish purse cut out that combines practical design with festive flair. Whether used as a standalone statement piece or part of an elaborate themed setup, it delivers both visual impact and ease of use. Trust Party Shapes to provide premium foam party accessories that turn ordinary parties into extraordinary experiences.

Design your candle lighting display by selecting your name, color and font style.  There is a $20.00 set up fee for joined script names.  The first letter will be separate and the remaining letters joined in a script font.

Select how many candles and candle holders you will need. The amount of candles will adjust your final price.

Choose the glitter color for the top of the tiered bases and the color you want around the edge of the bases. 

The length of the board is adjusted to accommodate the amount of letters in your name. The standard size for the bottom tier is 30"-36" long x 8" wide.  

Assembly required.  Approx. Assembly Time: 30 minutes

Click here for the video to see how easy it is to assembly your board.

Skill Level: Beginner
Product Information: Included are all the needed supplies and detailed instruction sheets  We do the prep work, no painting required.  The basic tools you will need are a yard stick or straight edge for lining up the letters and a pair of latex gloves to keep the glitter off your hands.

Use this Board for the Candle Lighting Ceremony for your child's Sweet 16, Quinceanera, Bat or Bat Mitzvah. Order it without candles and use it as a name board for disp

High Heel Shoe Centerpieces cut out of EPS Foam
You will receive one shoe and one base.

Choose the glitter color for the shoe and the glitter color for the base the shoe is sitting on.

The Shoe is 11" tall x 1.5" thick, on a 9" diameter base.
The centerpieces are shipped in separate pieces.
. 

Double Music Note cut out of 1.5" thick EPS foam.

Available in 3 sizes and your choice of glitter colors.

Use a toothpick or bamboo skewer to attach to a foam base.

 

Cross cut out of EPS foam.

Order unfinished or glittered in your choice of size and color.

Music Note cutout of 1 1/2" thick EPS foam.

Use bamboo skewer or toothpick to attach to a foam base.

Glittered Script Name Sign

Add a touch of sparkle to your celebration with a custom glittered name or word display. Perfect for candle lighting boards, party décor or wall displays.

Product Details

• Finished with glitter on all sides for a beautiful, complete look
• Created using Script MT Bold font
• The first letter is approximately 6 inches tall and cut in uppercase
• Remaining letters are sized proportionally and are slightly shorter
• The first letter is a separate piece and is not attached to the rest of the name
• Display sticks are not included unless specifically requested

Important Note
Names containing lowercase letters that extend below the baseline (f, g, j, p, q, and y) will be designed so that the first of these letters touches the board surface, causing the rest of the name to sit slightly higher.

Have questions or special requests? Contact us at customerservice@partyshapes.com.

Perfect for candle lighting ceremonies, milestone celebrations, party decorations, and personalized displays.

G-Clef cut out of 1.5" thick foam & available in 4 sizes
Available in 9" tall - 12" tall -16" -tall 24" tall

Add to a foam base using a tooth pick or bamboo skewer

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a music themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Basketball Dunker cut out of EPS foam 11" tall x 1.5" thick

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a basketball, sports party, sports teams themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

High Top Tennis Shoe shape cut out of EPS foam.
Available 9 inch or 11-inch-long x 1.5 inches thick. The height is proportional to the length.

The lips are 1.5" thick foam & available in 3 sizes.
6" wide x 4" tall
9" wide x 6" tall
12" wide x 8" tall

Price is for 1 piece.
Order Glittered or order unfinished to decorate the items with paint & glitter & add embellishments to add to your designs.
Spray paint can eat the foam.


Use foam cut outs for a Valentine Day, love, peace hearts, holiday themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if paint only. The glitter hides the masking tape better.

Foam star cut out

The star will be 1.5" thick foam & available in 3 sizes.
Available in 4" diameter - 6" diameter - 9" diameter - 12" diameter



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

11" tall x 1.5" thick EPS foam Football Runner

You can order them unfinished for you to decorate or you can order them in glitter colors.
The items will be glittered on all sides.

Use a foam base & tooth pick to make the figure stand up

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a sport or Football themed party decorations.



*

Male Runner, 12" tall x 1.5" thick EPS foam Male Runner 


Use cut outs for track and field event, runner, jogger or sport themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Treble Clef cut out of 1.5" thick foam & available in 4 sizes
Available in 9" tall - 12" tall -16" -tall 24" tall

Add to a foam base using a tooth pick or bamboo skewer

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a music themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Nail Polish Bottle available in 4 sizes.

The color choice is for the bottom/polish color.

The bottle will be 1.5" thick foam & available in 4 sizes 6" tall - 9" tall - 11" tall - 15" tall

You can order them unfinished for you to decorate or you can order them in glitter colors.
If order glittered the top of the bottle will be black. 

Star Spray measures 21" long.
Use for centerpieces and floral arrangements.

Sold by the dozen

Available sizes: 4" tall x 1" thick = $3.50 6" tall x 1" thick = $6.50 9" tall x 1.5" thick = $7.50 12" tall x 1.5" thick = $8.75

Crossed Hockey Sticks
8" tall x 1.5" thick EPS Foam Sports Figures.

Choose your glitter color or order it unfinished Unfinished white to finish it yourself

Foam retro daisy flower cut out


The Daisy will be 1.5" thick foam & available in 3 sizes
Available in 6" diameter - 8" diameter - 11" diameter 


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

11" tall x 1.5" thick EPS Foam Football Quarterback

You can order them unfinished for you to decorate or you can order them in glitter colors.
The items will be glittered on all sides.

Use a foam base & tooth pick to make the figure stand up

Use only water based non-petroleum products. Spray paint can eat the foam.

Use foam cut outs for a sport or Football themed party decorations.

EPS Foam High Heel Boot Cut Out

The shoe will be 1.5" thick foam & available in 3 sizes
You can order them unfinished for you to decorate or you can order them in glitter colors.
The items will be glittered on all sides.

Available in 6" tall - 9" tall - 11" tall

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a shopping, high heel shoe, diva themed party decorations.

Create your own custom decorations with our Unfinished Ballerina Foam Cutout. Each shape measures 11 inches tall, with the width proportional to the design, and is cut from 1.5" thick EPS foam.

Perfect for table centerpieces for recitals and all special occasions

Foam cutouts are lightweight and self-supporting. For extra stability, we recommend inserting them into a foam base.

Add a base for $6.00. Add Glittered Base $6.00 – Party Shapes, LLC

Decorating Tips

• Use water-based paints such as acrylic or tempera.
• For glitter application, mix paint and school glue in a 50/50 ratio, apply to the surface, and cover with glitter while wet.

Important Information

• Use water-based, non-petroleum paints and adhesives only.
• Spray paint may melt or damage EPS foam and should not be used.
• Always test new products on a small area first.
• Hot wire cut lines may be visible and can be filled with paintable latex caulk before decorating.

Attaching to a Foam Base
Insert a toothpick or bamboo skewer into the shape, remove it, add glue to the hole, and reinsert the skewer. Use same procedure for inserting it into the base.

✔ Lightweight yet sturdy
✔ Easy to paint and decorate
✔ Perfect for DIY centerpieces and party decor

________________________________________

Create your own custom decorations with our Unfinished Ballerina Foam Cutout. Each shape measures 11 inches tall, with the width proportional to the design, and is cut from 1.5" thick EPS foam.

Perfect for table centerpieces for recitals and all special occasions

Foam cutouts are lightweight and self-supporting. For extra stability, we recommend inserting them into a foam base.

Add a base for $6.00. Add Glittered Base $6.00 – Party Shapes, LLC

Decorating Tips

• Use water-based paints such as acrylic or tempera.
• For glitter application, mix paint and school glue in a 50/50 ratio, apply to the surface, and cover with glitter while wet.

Important Information

• Use water-based, non-petroleum paints and adhesives only.
• Spray paint may melt or damage EPS foam and should not be used.
• Always test new products on a small area first.
• Hot wire cut lines may be visible and can be filled with paintable latex caulk before decorating.

Attaching to a Foam Base
Insert a toothpick or bamboo skewer into the shape, remove it, add glue to the hole, and reinsert the skewer. Use same procedure for inserting it into the base.

✔ Lightweight yet sturdy
✔ Easy to paint and decorate
✔ Perfect for DIY centerpieces and party decor

________________________________________

 Girl Graduation Cut Out of 1 1/2" thick EPS Foam

Use can use a foam base & tooth pick to make the figure stand up!

Available in 8" tall - 11" tall -

If order unfinished use only water based non-petroleum products. Spray paint can eat the foam.

Lightweight electric guitar-shaped foam cutout perfect for displays, decorations, and craft projects. Made from EPS foam with a 1.5-inch thickness that holds its shape and resists damage. Available in four heights/sizes to fit any space or application. Ideal for party centerpieces and decorations. You receive one guitar in your choice of color and size.

High Heel Shoe Centerpieces cut out of EPS Foam. The 4" tall base is wrapped in silver rhinestone ribbon.
You will receive one shoe and one base.

Choose the glitter color for the shoe and the glitter color for the base.

The Shoe is 9" tall with a 6”x 4" tall base to sit on.
The centerpieces are shipped in separate pieces.
. 

 11" tall x 1.5" thick Female Runner

Use a toothpick or bamboo skewer to attach to a foam base.

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a Track N Field, runner, jogger or sport themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Create your own custom decorations with our Unfinished Ballerina Foam Cutout. Each shape measures 11 inches tall, with the width proportional to the design, and is cut from 1.5" thick EPS foam.

Perfect for table centerpieces for recitals and all special occasions

Foam cutouts are lightweight and self-supporting. For extra stability, we recommend inserting them into a foam base.

Add a base for $6.00. Add Glittered Base $6.00 – Party Shapes, LLC

Decorating Tips

• Use water-based paints such as acrylic or tempera.
• For glitter application, mix paint and school glue in a 50/50 ratio, apply to the surface, and cover with glitter while wet.

Important Information

• Use water-based, non-petroleum paints and adhesives only.
• Spray paint may melt or damage EPS foam and should not be used.
• Always test new products on a small area first.
• Hot wire cut lines may be visible and can be filled with paintable latex caulk before decorating.

Attaching to a Foam Base
Insert a toothpick or bamboo skewer into the shape, remove it, add glue to the hole, and reinsert the skewer. Use same procedure for inserting it into the base.

✔ Lightweight yet sturdy
✔ Easy to paint and decorate
✔ Perfect for DIY centerpieces and party decor

________________________________________

11" tall x 1.5" thick EPS foam Football Kicker.