10" tall x 1.5" thick. EPS Foam

12" tall x 1½" thick white EPS Foam.

Music Note cutout of 1 1/2" thick EPS foam.

Use bamboo skewer or toothpick to attach to a foam base.

Jogger cut out of 11" tall x 1.5" thick.

Use a toothpick or bamboo skewer to attach to a foam base - ordered separetly

Order unfinished or glittered in your choice of color.

Moon cut out of 1 1/2" thick EPS foam. Available in 6" and 11 1/2" tall.

 

EPS Foam
Available in 2 sizes.
8" tall x 12" wide x 1.5" thick
12" tall x 17" wide x1.5" thick

12" Tall Rugby Player

Male Diver Cut out of EPS foam  1 1/2" thick

Order unfinished or glittered

11" tall x 1½" thick EPS Foam.

 EPS Foam.12"tall x 1.5" thick.

EPS Foam Headphone Cut Out

The headphones will be 1.5" thick foam & available in 2 sizes
You can order them unfinished for you to decorate or you can order them in glitter colors.
The items will be glittered on all sides.

Available in 8" tall - 11" tall
The approx sizes high & width would be 8" x 8" & 11" x 11"

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a music, hip hop, beats, headphones themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Basketball Dunker cut out of EPS foam 11" tall x 1.5" thick

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a basketball, sports party, sports teams themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Block Font Letters All Capitals Glittered On All Sides

For sizing purposes, estimate letters that are 6" tall as 6" wide.

For a 36" long Candle Lighting Name Board we recommend 5" or 6" tall letters for names having 6-7 letters,

We are not responsible if letters ordered are too large for the space they are being used.

Email dpfgood@gmail.com or call us with questions.

👠 High Heel Stiletto Foam Cutout – Unfinished or Glittered

Add a glamorous touch to your Sweet 16, shopping or diva-themed party decorations with this stiletto heel foam cutout. Perfect for table centerpieces, or event décor.

---

✨ Glittered Cutouts

• Fully coated in glitter on all sides
• Can be attached to a foam base with a toothpick or bamboo skewer
• Available in custom sizes per listing

Note: Each piece is sprayed with a sealer before shipping, but glitter will still flake off.

 

🎨 Unfinished Cutouts

• Perfect for DIY decorating, painting, or glittering
• Can be attached to a foam base with a toothpick or bamboo skewer
• Available in custom sizes per listing
• Use only water-based, non-petroleum paints, glues, or coatings
• Bulk discounts available

Note: Use water-based paints (tempera or acrylic) and glue for decorating unfinished foam. Mix paint and school glue, apply, and cover with glitter while wet. Do not use petroleum-based paints or spray paints—they can damage EPS foam. Test new products on a small area first.

Individual Letters in Bookman script font.

First letter upper case in selected size.  Rest of letters sized proportionally in lower case letter

Add a base for $5.00 to stand attach the letters. Letters can be attached using a toothpick.

 

Select choice of glitter color.

Letters are covered with glitter on all sides. 

For sizing purposes estimate the letter width the same as the letter's height. Generally, a 36" candle lighting board will fit 6 or 7 letters that are 5" or 6" tall.  If you are unsure, you can contact us at dpfgood@gmail.com

To attach letters to a foam board, insert and glue toothpick to bottom of letter - then insert into base.  Letters that drop below the line such as, f, g, j, p, q, y and y will need extra adjustments. A bamboo skewer can be used for letters being inserted into a centerpiece.

 

11" tall x 1.5" thick Glittered Gymnastics Dancer cut out

Use a toothpick or bamboo skewer to insert into a foam base.  Base not included.

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a sport, dance, or gymnastic themed party decorations.

Soccer Kicker cut out of 11"tall x 1.5" thick EPS foam.

Base not included.  Use skewer or toothpick to insert into a foam base.

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a soccer sports party, sports teams themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

 

Soccer Kicker cut out of 11"tall x 1.5" thick EPS foam.

Base not included.  Use skewer or toothpick to insert into a foam base.

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a soccer sports party, sports teams themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

 

Carousel Horse – Unfinished or Glittered Foam Cutout

Bring your creative ideas to life with this lightweight EPS foam cutout — perfect for DIY table centerpieces or party decorations.

✨ Glittered Cutouts

• Fully coated in glitter on all sides
• Can be attached to a foam base with a toothpick or bamboo skewer
• Available in custom sizes per listing

Note: Each piece is sprayed with a sealer before shipping, but glitter will flake off.

 

🎨 Unfinished Cutouts

• Perfect for DIY decorating, painting, or glittering
• Can be attached to a foam base with a toothpick or bamboo skewer
• Available in custom sizes per listing
• Use only water-based, non-petroleum paints, glues, or coatings
• Bulk discounts available

Note: Use water-based paints (tempera or acrylic) and glue for decorating unfinished foam. Mix paint and school glue, apply, and cover with glitter while wet. Do not use petroleum-based paints or spray paints—they can damage EPS foam. Test new products on a small area first.

Horse & Rider cut out of 11" long x 6” tall x 1.5" thick EPS foam

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a equestrian, horse back riding event themed party decorations.

 

Cheerleader cut out of EPS Foam.11"tall x 1.5" thick

 6" base included

 

Cheerleader cut out of EPS Foam.11"tall x 1.5" thick.
Order glittered in your choice of color or unfinished. 

Cheerleader cut out of EPS Foam.11"tall x 1.5" thick.
Order glittered in your choice of color or unfinished. 

Cross cut out of EPS foam.

Order unfinished or glittered in your choice of size and color.

Treble Clef cut out of 1.5" thick foam & available in 4 sizes
Available in 9" tall - 12" tall -16" -tall 24" tall

Add to a foam base using a tooth pick or bamboo skewer

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a music themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

11" tall x 1.5" thick Hockey Player




**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if you're just painting. The glitter hides the masking tape better.

High Top Tennis Shoe shape cut out of 1 .5" thick EPS foam in 3 sizes.

The shoe will be 1.5" thick foam & available in 3 sizes
You can order them unfinished for you to decorate or you can order them in glitter colors.
The items will be glittered on all sides.

Available in 6" tall - 9" tall - 11" tall

Use only water based non-petroleum products. Spray paint can eat the foam.

Basketball Dunker EPS Foam Cutout – 11" Tall x 1.5" Thick (Unfinished, Bulk)

Our Basketball Dunker foam cutout is perfect for large events and creative projects. Sold unfinished and in bulk for decorators, event planners, and DIY crafters who want flexibility and savings.

Product Details:

• Size: 11" tall x 1.5" thick

• Material: Expanded Polystyrene (EPS) Foam

• Finish: Unfinished (ready to decorate)

• Sold in bulk quantities for discounted pricing

Uses:
Ideal for customizing and adding to:

• Sports-themed centerpieces

• Banquets and team events

• Bar/Bat Mitzvahs

• Birthday parties

• Graduations and award nights

Decorating Tips:

• Use water-based paints (tempera or acrylic) and white school glue.

• To add glitter: mix glue with paint, apply evenly, and sprinkle glitter while wet.

• Avoid petroleum-based or spray paints — they can melt or damage the foam.

• Test new products on a small area before full application.

Note:
Some shapes may have small cut lines (approx. 1/8" wide) from the hot-wire cutting process. These can be filled with paint spackle or caulk before decorating.