EPS Foam Disc is 12" diameter and is 1.5" thick.
Unfinished white Foam

1.5" thick discs are great for centerpiece bases.

Do not use petroleum based paints or adhesives on Styrofoam products.

Neon Colors - type of tissue but not paper

Measures 18" x 30" rectangle.
Non-metallic 

Measures 18" tall x 1.5" thick EPS Foam.
EPS Foam can be decorated with water based paints, adhesives and glitter.

20" x 20" Mylar Foil sheet.

Clear Cellophane Sheets with design printed.  These sheets can be cut to make foil poufs for your centerpieces or to decorate gift baskets.

 

20" x 20" Mylar Foil sheet.

This foil is thicker than the foil used to make poufs. The white foil is while on one side and iridescent on the other side.  The burgundy is two sided 

20" x 20" Mylar Foil sheet.

Thin foil used to wrap around centerpiece base.

Number 2024 cut out of 1.5" thick EPS foam.

 Order unfinished or glittered on all sides

Choose your size & quantity from the drop down menu.

Sizes available:
4” tall 
6” tall 
8” tall 

42 inches 35mm film for Movie Night Centerpiece

Three Unfinished EPS foam letters are joined together. Each letter is 5" tall x 1.5" thick. They are 15" long when joined together. Choose Horizontal or Vertical orientaion for the joined letters. View all our Custom Finished Letters & Numbers here. View all our Unfinished Letters & Numbers here.

Rod & Pick Options for EPS Foam Cut Outs: Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point. Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point. Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look. Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

Custom finished 1 1/2" tall x 6" x 12" rectangular foam base with your choice of ribbon edge trim.

It's easy to create your own centerpiece design by inserting foils, sprays and theme products into your base.

Choose your options then add to cart.

Custom finished 1 1/2" tall x 6" x 20" rectangular foam base with your choice of ribbon edge trim.

It's easy to create your own centerpiece design by inserting foils, sprays and theme products into your base.

Choose your options then add to cart.

6" diameter snowflakes.
Save by purchasing a pack of 6.
Color: White.

EPS Foam Number 75. Available in 6 sizes. Choose the Custom Glitter Finish for all sides. Use for a 75th Anniversary or Birthday Party. Attach letters by pushing the insertion sticks (included) into your EPS Foam™ base. Secure using a glue gun.

Custom Finish Choices

Custom finished 1 1/2" tall x 8" x 35" rectangular Eps foam base with a matching 4" x 32" base stacked on top. Your choice of ribbon edge trim.

It's easy to create your own centerpiece design by inserting foils, sprays and theme products into your base.

Choose your options then add to cart.
Next Find Add ons - to finish your centerpiece

Apple Green colored acrylic beads accented with shimmering reflective plastic pieces that give it a very unique and brilliant appearance. The beads are wired so you can shape them to your needs. The whole stem can be used, or pieces can be cut off and added to your arrangement.

 

Size: 19” long – beaded area 13” with a 6” stem.

 

Watch our instructional video: Click here

 

Add a 4" wide glittered base to attach your names

Add a glittered base to attach your figures. This will be a 6" disc unless a rectangle base is a better option for the shape or size of your figure. 

Silver spray with silver metallic 25's.  Measures 21" long.

Gold spray with gold metallic 50's.  Measures 21" long.

Measures approx. 1 1/2" wide. (#9)
Aqua background with Chocolate Polka Dots.
Available by the yard or a 20 yard roll.

Cutout of EPS foam.11"tall x 1.5" thick.

Measures approx. 1 1/2" wide. (#9)
Red with black characters.
Only available by the yard

Baby Bottle cut out of 1.5" thick EPS foam.

Base not included. 

Available in 3 sizes
Available in 12" tall - 18" tall - 23" tall.

Order unfinished or glittered in your choice of color. If order unfinished use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a baby shower, gender revealing party or 1st Birthday

A Balloon Weight that looks like Blue Baby Shoes is a cute way to make a balloon centerpiece for a boy baby shower. This can also be used to display photos. Dimensions: 2 1/2" x 3".

A Balloon Weight that looks like Pink Baby Shoes is a cute way to make a balloon centerpiece for a girl baby shower. This can also be used to display photos. Dimensions: 2 1/2" x 3".

White Unfinished EPS Foam.10"Long x 6" tall x 1.5" thick. Decorate with paint and glitter. Use only water based non-petroleum products.

Measures 10" long x 6" tall.

11" tall x 1.5" thick Ballerina cut out

You can order them unfinished for you to decorate or you can order them in glitter colors.
The items will be glittered on all sides.

Use a foam base & tooth piece to make the figure stand up

Use only water based non-petroleum products. Spray paint can eat the foam.

Contact us if you need the items finished with a color, larger, or custom shapes.

Use Party Shapes cut outs for a Ballerina party, sports end of the year banquet, cheer themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

 

Ballerina Figure cut out of EPS foam 11"tall x 1.5" thick.
Order glittered or unfinished.

Attach to a foam base by inserting and gluing a toothpick or bamboo skewer.

 Great for a dance recital, prom, or any special celebration

Use foam cut outs for a birthday party, end of the year banquets, ballerina themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

 

Measures 15" tall.
Glitter Top 30 Spray and Weight together.

Measures approx. 1 1/2" wide. (#9).
Royal with Silver imprinting.

Two Tiered Base - 24"-36" long (adjusted to fit the length of name) 1 1/2" thick foam

Most names with 7 or less letters will fit on standard board.  If name is longer - check to see if an additional board will be needed.

Select the glitter color for the top of the bases and how you want the base edge finished.  It can be glittered the same as the base top, the name, or a themed ribbon.

Baseball Hitter cut out EPS foam 11" x 1.5" thick foam.

Order unfinished or glittered in your choice of color. If order unfinished use water based non-petroleum products. Spray paint can eat the foam.

Base not included but can be ordered separately 

Use cut outs for a baseball, sports banquet and party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Baseball Pitcher
11" tall x 1.5" thick EPS Foam Sports Figures.

Choose your glitter color or order it Unfinished white to finish it yourself.

A Baseball Place Card Holder is a great way to display place cards.
This holder can also be used as a balloon weight. Dimensions: 2 1/2" x 3".

A Basketball Place Card Holder is a great way to display place cards.
This holder can also be used as a balloon weight. Dimensions: 2 1/2" x 3".

Basketball Dribbler cut out of 11" tall x 1.5" thick EPS foam

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a basketball, sports party, sports teams themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Female Basketball Dribbler cut out of 11" tall x 1.5" thick EPS foam

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a basketball, sports party, sports teams themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Basketball Shooter cutout standee 15" tall x 1.5"

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a basketball, sports party, sports teams themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

 

11" tall x 1.5" thick white Glittered Basketball Female Shooter Cut out

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a basketball, sports party, sports teams themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Use cut outs for a basketball, sports party, sports teams themed party decorations.

Basketball Dunker cut out of EPS foam 11" tall x 1.5" thick

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a basketball, sports party, sports teams themed party decorations.



**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.