White Unfinished EPS Foam
Available in 2 sizes.
8" tall x 12" wide x 1.5" thick
12" tall x 17" wide x1.5" thick

Decorate with paint and glitter. Use only water based non-petroleum products.

Email info@awesomeevent.com or call us with any questions or if you need a custom size or design.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to punture the foam with a sharp point.
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a STYROFOAM^tm base. You will first need to punture the foam with a sharp point.
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

A Soccer Place Card Holder is a great way to display place cards.
This holder can also be used as a balloon weight. Dimensions: 2 1/2" x 3".

11" tall x 1.5" thick Styrofoam Soccer Girl cut out

Base not included.  Use skewer or toothpick to insert into a foam base.

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for sports party, sports teams themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Soccer Kicker cut out of 11"tall x 1.5" thick EPS foam.

Base not included.  Use skewer or toothpick to insert into a foam base.

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for sports party, sports teams themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Ceramic Soccer Ball Planter measures 6" x 6" x 3.75" high. The opening on the top is 3.75"

Soccer Kicker cut out of 11"tall x 1.5" thick EPS foam.

Base not included.  Use skewer or toothpick to insert into a foam base.

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a soccer sports party, sports teams themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Soccer Kicker cut out of 11"tall x 1.5" thick EPS foam.

Base not included.  Use skewer or toothpick to insert into a foam base.

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a soccer sports party, sports teams themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Measures approx. 1 1/2" wide. (#9).
White with Soccer Balls.
Available by the yard or in a 25 yard roll.

White Unfinished EPS Foam.12"tall x 1.5" thick.
Decorate with paint and glitter. Use only water based non-petroleum products.
Email info@awesomeevent.com or call us with any questions or if you need a custom size or design.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to punture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a STYROFOAM^tm base. You will first need to punture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

12" tall x 1.5" thick EPS foam Female Softball Player

Attach to a foam base using toothpick or bamboo skewer.

You can order unfinshed or glittered on all sides in your choice of color. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a sport or Softball themed party decorations.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

White Unfinished EPS Foam.12"tall x 1.5" thick.
Decorate with paint and glitter. Use only water based non-petroleum products.
Emailinfo@awesomeevent.comor call us with any questions or if you need a custom size or design.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

White Unfinished EPS Foam.12"tall x 1.5" thick.
Decorate with paint and glitter. Use only water based non-petroleum products.
Emailinfo@awesomeevent.comor call us with any questions or if you need a custom size or design.

Rod & Pick Optios for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

Square Base cut out of 1.5" thick EPS foam (soft foam).

It's easy to build a centerpiece by inserting foils, sprays and theme products into the base.  First puncture foam with a bamboo skewer before inserting items.

Order unfinished or glittered on all sides in your color choice.  The edge can be finished with matching glitter or a theme ribbon.

If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

A Star Place Card Holder is a great way to display place cards.
This holder can also be used as a balloon weight. Dimensions: 2 1/2" x 3".
Choose Silver or Gold.

Assorted Gold and Silver. 13" long.
Use to insert cards into centerpiece arrangements.

White Unfinished EPS Foam
Available in 4 sizes.

Decorate with paint and glitter. Use only water based non-petroleum products.

Emailinfo@awesomeevent.comor call us with any questions or if you need a custom size or design.

Rod & Pick Options for EPS Foam Cut Outs:
Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.

• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

A Star of David Place Card Holder is a great way to display place cards. This holder can also be used as a balloon weight. Dimensions: 2 1/2" x 3".

White Unfinished EPS Foam
Available in 4 sizes.

Decorate with paint and glitter. Use only water based non-petroleum products.
Emailinfo@awesomeevent.comor call us with any questions or if you need a custom size or design.

Measures 15" tall.
Glitter Top Star Spray and Weight together.

Measures 15" tall.
Glitter Top Star Spray and Weight together.

Glittered Finished EPS Foam
Available in 4 sizes.

Comes with a 9" acrylic rod to insert into your centerpieces.

Emailinfo@awesomeevent.comor call us with any questions or if you need a custom size or design.

White Unfinished EPS Foam
Available in 5 sizes.

Decorate with paint and glitter. Use only water based non-petroleum products.

Emailinfo@awesomeevent.comor call us with any questions or if you need a custom size or design.

Rod & Pick Options for EPS Foam Cut Outs:

• Acrylic Rods - use if you need to elevate your foam cut out above foil poufs or fill in an arrangement. You will first need to puncture the foam with a sharp point.
  
• Wooden Picks - glue 1" wooden picks in the bottom if you want your foam cut out sitting flush on top of a EPS Foam base. You will first need to puncture the foam with a sharp point.
  
• Bamboo Skewers - the point is easy to insert into a foam cut out but you may want to paint or decorate for a more festive look.
  
• Rods or Picks won't be needed if you're mountng your foam cut out on a board or background.

9" tall x 1 1/2" thick Stiletto with rhinestone ribbon accent on a 6" base.  Add any number 1-100 to celebrate a milestone occasion.