The High-Top shoe is 9-inch-long x 1.5 inches thick sitting on a 6-inch diameter glittered disc. The finished Centerpiece Height - 10-inches.

The first color selection is the color of the shoe.  The second color selection is for the accents on the shoe and the disc it sits on.

The shoes are glittered with a loose glitter that will come off even though we brush and seal it.

The centerpieces are shipped in separate pieces for you to assemble by inserting the attached picks into the base.
. 

Hip Hop Foam Cutout - 11 inches with width proportional to height.

 Perfect for recitals and party decorations.

Unlike paper or cardboard, our cutouts are made from 1.5" thick EPS foam, making them self-supporting. However, we recommend inserting them into a base.

Add a foam base for $6.00:

Add Glittered Base $5.00 – Party Shapes, LLC

The size and shape of the base will depend on the design.

________________________________________

✨ Glittered Cutouts

Fully coated in glitter for a sparkly finish. Some glitter flaking is normal and does not affect the product quality. To reduce flaking, you can apply multiple coats of brush-on gloss Mod Podge. Do not use other sealers, which may damage the foam.

________________________________________

🎨 Unfinished Cutouts (DIY)

Perfect for painting, decorating, or adding your own glitter.

Use water-based, non-petroleum paints, glues, or coatings only.

⚠️ Do NOT use spray paint or aerosol sealers — they will melt the foam.

Minor cut lines from the hot wire may be present. These can easily be filled with paintable latex caulk before decorating.

 Hip Hop Dancer cut out of 11" tall x 1.5" thick foam

 Hockey Goalie - Cut out of 1.5" EPS foam.

11" tall x 1.5" thick Hockey Player




**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if you're just painting. The glitter hides the masking tape better.

Crossed Hockey Sticks
8" tall x 1.5" thick EPS Foam Sports Figures.

Choose your glitter color or order it unfinished Unfinished white to finish it yourself

Hockey Pitcher
11" tall x 1.5" thick EPS Foam Sports Figures.

Choose your glitter color or order it unfinished Unfinished white to finish it yourself

Signs esch measure 4" x 24".
Made of card stock.
Purple. Set of 4.

White Unfinished EPS Foam.

Both pieces are 11" wide tall x 1.5" thick.

Horse & Rider cut out of 11" long x 6” tall x 1.5" thick EPS foam

Order unfinished or glittered on all sides in your color choice. If order unfinished, use only water based non-petroleum products. Spray paint can eat the foam.

Use EPS foam cut outs for a equestrian, horse back riding event themed party decorations.

Horse cut out

The items will be glittered on all sides.
Available in 3 sizes.
9" wide x 7" tall
11" wide x 8" tall
14" wide x 11" tall

Use only water based non-petroleum products.

Attach to a foam base with a toothpick or bamboo skewer

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better
The horse will be 1.5" thick foam & available in 3 sizes
You can order them unfinished for you to decorate or you can order them in glitter colors.

Measures 15" tall.
Glitter Top Jockey Spray and Weight together.

Measures 2" diameter star on a 15" stem.
Hot Pink Glitter finish.

Hurdler Female Foam Cutout - 11 inches tall

Perfect for sports banquet table centerpieces.

Unlike paper or cardboard, our cutouts are made from 1.5" thick EPS foam, making them lightweight, durable, and easy to handle. Most cutouts can stand on their own, but because they are lightweight, they may tip if the table is bumped. For extra stability, we recommend inserting them into a base.

✨ Glittered Cutouts

Fully coated in glitter for a sparkly finish. Some glitter flaking is normal and does not affect the product quality. To reduce flaking, you can apply multiple coats of brush-on gloss Mod Podge. Do not use other sealers, which may damage the foam.

________________________________________

🎨 Unfinished Cutouts (DIY)

Perfect for painting, decorating, or adding your own glitter.

Use water-based, non-petroleum paints, glues, or coatings only.

⚠️ Do NOT use spray paint or aerosol sealers — they will melt the foam.

Minor cut lines from the hot wire may be present. These can easily be filled with paintable latex caulk before decorating.

One half pound bag.
Metallic Iridescent

Jogger cut out of 11" tall x 1.5" thick.

Use a toothpick or bamboo skewer to attach to a foam base - ordered separetly

 11" tall x 1.5" thick Female Runner

Use a toothpick or bamboo skewer to attach to a foam base.

Use only water based non-petroleum products. Spray paint can eat the foam.

Use glittered cut outs for a Track N Field, runner, jogger or sport themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Custom EPS foam letters are joined together. All 3 letters will be Block font all capitals. Each letter is 5" tall x 1.5" thick.

Enter the 3 letters you need

Choose Vertical (top to bottom) or Horizontal (left to right)

They are approx 15" long (vertical) or 15" tall (horizontal) when joined together.

Contact us for larger letters

3 Numbers joined

Available in 3 sizes

Set up for joined script names

Glittered Script Name Sign

Add a touch of sparkle to your celebration with a custom glittered name or word display. Perfect for candle lighting boards, party décor or wall displays.

Product Details

• Finished with glitter on all sides for a beautiful, complete look
• Created using Script MT Bold font
• The first letter is approximately 6 inches tall and cut in uppercase
• Remaining letters are sized proportionally and are slightly shorter
• The first letter is a separate piece and is not attached to the rest of the name
• Display sticks are not included unless specifically requested

Important Note
Names containing lowercase letters that extend below the baseline (f, g, j, p, q, and y) will be designed so that the first of these letters touches the board surface, causing the rest of the name to sit slightly higher.

Have questions or special requests? Contact us at customerservice@partyshapes.com.

Perfect for candle lighting ceremonies, milestone celebrations, party decorations, and personalized displays.

Jukebox cut out of unfinished EPS Foam.12"tall x 1.5" thick.

Only use water based non-petroleum paint to finish

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if just painting. The glitter hides the masking tape better.

Karate Figure cut out of EPS foam 11"tall x 1.5" thick.

Lacrosse Figure cut out of EPS Foam 11"tall x 1.5" thick.
Order unfinished or glittered

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Lacrosse female figure cut out of 12"tall x 1.5" thick.
Decorate with paint and glitter. Use only water based non-petroleum products.

**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if your just painting. The glitter hides the masking tape better.

Measure approx. 1 1/2" wide. (#9)
Red with lasso print.
Available by the yard or in a 20 yard roll.

Individual Letters in Bookman script font.

First letter upper case in selected size.  Rest of letters sized proportionally in lower case letter

Add a base for $5.00 to stand attach the letters. Letters can be attached using a toothpick.

A Life Preserve Place Card Holder is a great way to display place cards.
This holder can also be used as a balloon weight. Dimensions: 2 1/2" x 3".

One half pound bag.
Metallic Light Blue

Measures approx. 1 1/2" wide.
Available by the yard or in a 20 yd roll.

 Lipstick cut out available in 4 sizes.

Either unfinished white or glittered with top red, middle gold & bottom black.
If you prefer other colors for the top, middle & bottom. Just order them finished & add a note of your colors.

The lips are 1.5" thick foam & available in 3 sizes.
6" wide x 4" tall
9" wide x 6" tall
12" wide x 8" tall

Price is for 1 piece.
Order Glittered or order unfinished to decorate the items with paint & glitter & add embellishments to add to your designs.
Spray paint can eat the foam.


Use foam cut outs for a Valentine Day, love, peace hearts, holiday themed party decorations.


**Disclaimer: There may be cut lines in some figures where the hot wire needed an entry & exit line to get into the center of a figure to finish cutting the shape. This line is 1/8th of an inch wide. Use paint spackle or masking tape to cover cut lines when painting &/or glittering. Spackle works better if paint only. The glitter hides the masking tape better.

Cheerleader cut out of EPS Foam.11"tall x 1.5" thick.
Order glittered in your choice of color or unfinished. 

Male Diver Cut out of EPS foam  1 1/2" thick

Order unfinished or glittered

Male Golfer Cut out of EPS foam . 11"tall x 1.5" thick.

Create your own custom decorations with our Unfinished Ballerina Foam Cutout. Each shape measures 11 inches tall, with the width proportional to the design, and is cut from 1.5" thick EPS foam.

Perfect for table centerpieces for recitals and all special occasions

Foam cutouts are lightweight and self-supporting. For extra stability, we recommend inserting them into a foam base.

Add a base for $6.00. Add Glittered Base $6.00 – Party Shapes, LLC

Decorating Tips

• Use water-based paints such as acrylic or tempera.
• For glitter application, mix paint and school glue in a 50/50 ratio, apply to the surface, and cover with glitter while wet.

Important Information

• Use water-based, non-petroleum paints and adhesives only.
• Spray paint may melt or damage EPS foam and should not be used.
• Always test new products on a small area first.
• Hot wire cut lines may be visible and can be filled with paintable latex caulk before decorating.

Attaching to a Foam Base
Insert a toothpick or bamboo skewer into the shape, remove it, add glue to the hole, and reinsert the skewer. Use same procedure for inserting it into the base.

✔ Lightweight yet sturdy
✔ Easy to paint and decorate
✔ Perfect for DIY centerpieces and party decor

________________________________________